2. Mold Cavity Arrangement:

In mold layout, it is usually necessary to arrange the slider on the outside, as shown in below, so as to facilitate compact layout. On the other hand, the slider needs to be lined up on the operator and non-operator sides, that is, the slider moves in a horizontal direction as it works. The bone position of the small end of the plastic part was released with inclined top. Because the inclined top is small, the two adjacent inclined tops are very close to each other. In order to save space, the two inclined tops are designed on the same inclined top seat, and the height of the inclined top seat is increased. Because the inclined top is small, a single guide chute is designed. The small inclined top single guide chute can be hung by 1.5mm, there is no need to design both sides of the guide chute, so as not to affect its strength.

Plastic parts belong to appearance parts, the design of gate is very key. Through the analysis of plastic parts, the position of the gate can only be designed at the top edge of the big end of the plastic parts. The gate is a side gate, which is cut off after injection. The large end of the plastic parts need to design the slider, so the gate needs to be designed on the slider, the slider core moving, must not interfere with the gating system condensate, so the diverter is designed on the front mold, forming a complete loop. In order to ensure the accurate closing of the front and rear die, the four corners of the front and rear die are designed respectively. Select the parting surface of the front and rear die, as far as possible to make the shunt smooth, easy to melt plastic flow.

Note: Our factory Dongguan Cents Industrial Co.,Ltd is very professional in making all kinds of plastic injection molds. We provide detailed design constructure and not ignore any small thing. This is why so many customers like to work with our factory. Till now, we make around 100sets molds for customers from Europe, USA, Japan, Iran, Brazil...

  Our factory has been certified by ISO association adn NAQ16949 for Auto parts
  

Cents is a factory with 20 years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13,000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company's core value requirements;

  ***More than 40 sets injection machines;
  ***More than 20 engineers and 200 workers;
  ***One-stop service in making mold and molding;
  ***Anti-dust workshop for IMD/IML molded parts;
  ***Assembly line available for some finished parts;
  ***Most advanced equipment for EDM & WEDM, Sodick brand injection machine
  Our mold process machine list and injection machine list is attached below: