Basic Info.
Model NO.
Can be customized
Warranty
1 Year After Shipped on Board
Shaping Mode
Injection Mould
Surface Finish Process
The Surface Can Be Customized
Mould Cavity
Single Cavity or Multi Cavity
Plastic Material
PBT. or Any Plastic Material, Customized
Process Combination Type
Compound Die
Application
Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware, All Plastic Parts Relating
Runner
Cold or Hot Runner, According to Part Construction
Design Software
Step, STP
Certification
TS16949, ISO
After-sales Service
1 Year Guarantee
Mould Material
Can Be Customized
Keyword
Plastic Injection Mold
Cavity
1*1can Be Customized
Gate
Sub Gate, Pin Gate... Can Be Customized
Part Material
PBT+PC Can Be Customized
Name
Manufacturing Molding Service Public Entertainment
Trademark
Cents or Customized
Product Description
Product Description
Product Name: Manufacturing Molding Service Public Entertainment Equipment Custom Injection Mold Building Moulds Builder
1. General Information for Long size plastic playground slide for Children:
Size:1438.89mm x 376.95mm x 214.80mm,
the average glue thickness of plastic parts is 3.17mm,
the material of plastic parts is PE, the shrinkage rate is 1.018, the weight of plastic parts is 2726.03g
Cavity: 1*1
Runner: Hot Runner (Yudo brand)
Features 1: shape is not regular.Playground slides are common recreational facilities in kindergartens. Slides have a variety of structures, including ups and downs, sliding ramps and spirals.
Features 2: Playground slide commonly used PE and PP materials design and production. The material itself is non-toxic and harmless.
Features 3: The appearance design of the product meets the entertainment needs of children without sharp parts and cannot cause harm to children.
Features 4: The plastic parts are large in size and simple in structure. The parting surface of the mold is curved, and there are 4 holes on the edge of the plastic parts to design the slider for core pulling;
Features 5: Use hot runner with 3 pins
Features 6:Due to the performance requirements of plastic parts, there should be no gate or other thimble marks on the external surface. For this reason, the structure of inverted die is designed. Because THE THIMBLE BOARD IS HUGE, IT IS DIFFICULT TO BALANCE THE EJECTION BY DESIGNING TWO OR FOUR OIL CYLINDERS AT BOTH ENDS OF THE THIMBLE BOARD, SO TWO EJECTION CYLINDERS ARE DESIGNED in THE middle of THE THIMBLE board, and the square iron on EACH side is cut into two ends
2.The Mold Design Points for this playground slide
For such a large mold, the mold cavity mostly uses the original body design method. The front and rear die AB plates are made of P20. The cavity of the front die is directly made on board A and processed by large gantry CNC. There are many processing contents of the back die insert, which requires wire cutting the top pinhole and EDM machining the bone position. The machine size of these two processes is limited, so the back die insert is divided into three parts, as shown in FIG. 5.
Large mold, easy to produce a lack of rigidity, therefore, in addition to the template needs to meet the rigid design and strength design, the combination of strength between the template is equally important, after the rigid mold, the need for the template on the tiger to achieve. See FIG. 6 for 6 tiger openings
Note: Our factory Dongguan Cents Industrial Co.,Ltd is very professional in making all kinds of plastic injection molds. We provide detailed design constructure and not ignore any small thing. This is why so many customers like to work with our factory. Till now, we make around 100sets molds for customers from Europe, USA, Japan, Iran, Brazil...
| Cavity material | Nak80, S136 or other |
| Mold base material | C50 or other |
| Gate | Subgate, Pin gate... according to product design |
| Shot time | 10-120seconds according to product design, mold design |
| Runner | Cold or hot runner |
| Mold life | At least 300000 shots. |
| Product material | Abs, PC, ABS+PC, PP, POM, Pa66, PE..... |
| Mold delivery time | 25-50 days |
Certifications
Our factory has been certified by ISO association adn NAQ16949 for Auto parts
Company Profile
Cents is a factory with 20 years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13,000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company's core value requirements;
Our Advantages
***More than 40 sets injection machines;
***More than 20 engineers and 200 workers;
***One-stop service in making mold and molding;
***Anti-dust workshop for IMD/IML molded parts;
***Assembly line available for some finished parts;
***Most advanced equipment for EDM & WEDM, Sodick brand injection machine
Our Main Products
Customer Comments
Address:
Room 301, No. 1, Zhenglongyi Road, Chang′an Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, IATF16949
Company Introduction:
Cents is a factory with many years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13, 000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company′s core value requirements
){kind=link}