Basic Info.
Model NO.
Can be customized
Warranty
1 Year After Shipped on Board
Shaping Mode
Injection Mould
Surface Finish Process
The Surface Can Be Customized
Mould Cavity
Single Cavity or Multi Cavity
Plastic Material
Any Plastic Material, Customized
Process Combination Type
Compound Die
Application
Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware, All Plastic Parts Relating
Runner
Cold or Hot Runner, According to Part Construction
Design Software
Step, STP
Certification
TS16949, ISO
After-sales Service
1 Year Guarantee
Usage
According to Design
Mould Material
Can Be Customized
Keyword
Plastic Injection Mold
Cavity
1*2 Can Be Customized
Gate
Sub Gate, Pin Gate... Can Be Customized
Part Material
ABS+PC Can Be Customized
Trademark
Cents or Customized
Product Description
Product Description
Product Name: Custom OEM/ODM Mold Design Mold Process High Precision Plastic Components Manufacturer Plastic Parts Injection Molding Service
1. General information for this mold
It is a round product. There are undercuts on the front and side of the product. At the same time, the upper horizontal surface of the product is also inverted with undercut. The mold design of such a product is very difficult. Because there must be sliders on all sides, and at the same time, oblique sliders should be also added to the sliders. Only in this way can the product be released smoothly during the production process, The picture is as below:
Product Parameters
2. Product feeding method(Gate information): There are many kinds of product feeding methods, such as bottom feeding, diving feeding, direct gate, horn feeding, point feeding, small nozzle to large nozzle feeding, etc. This set of molds adopts The glue feeding method of the submerged mold directly enters the side of the product, as shown in the following figure:
3. Product difficulty anylze: From the slope of the product, it can be seen that there is an undercut right in front of the product, and there are undercuts in the whole circle of the product. There are also horizontal undercuts in the left and right directions of the product. There are two diagonal undercuts at the back of the product. The analysis results are as follows shown:
4.There is an undercut right in front of the small product. This undercut is designed according to the design method of an ordinary slider. Because the slider is relatively small, the limit method of the slider is limited by a glass bead screw, and the inclined guide column drives the row seat. , the structure is shown in the following figure:
5. About sliders: Since the product is round, there is an undercut in the whole circle. We generally use the Haval slider to form the whole circle. When designing the Haval slider, we should pay attention to: the Haval slider should be designed and positioned, because the area of the slider is covered with rubber. The range is large, and the cooling water is designed on the row position, as shown in the following figure
6. Special points:
There is also an undercut in the rear direction of the product. The undercut is inclined, and the slider cannot be demolded at one time in the direction of ejection. Therefore, it is necessary to design the slider inside the slider. Due to the limited space of the product, the drive method of the slider adopts Dial block connection, as shown below:
Note: Our factory Dongguan Cents Industrial Co.,Ltd is very professional in making all kinds of plastic injection molds. We provide detailed design constructure and not ignore any small thing. This is why so many customers like to work with our factory. Till now, we make around 100sets molds for customers from Europe, USA, Japan, Iran, Brazil...
Cavity material | Nak80, S136 or other |
Mold base material | C50 or other |
Gate | Subgate, Pin gate... according to product design |
Shot time | 10-120seconds according to product design, mold design |
Runner | Cold or hot runner |
Mold life | At least 300000 shots. |
Product material | Abs, PC, ABS+PC, PP, POM, Pa66, PE..... |
Mold delivery time | 25-50 days |
Certifications
Our factory has been certified by ISO association adn NAQ16949 for Auto parts
Company Profile
Cents is a factory with 20 years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13,000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company's core value requirements;
Our Advantages
***More than 40 sets injection machines;
***More than 20 engineers and 200 workers;
***One-stop service in making mold and molding;
***Anti-dust workshop for IMD/IML molded parts;
***Assembly line available for some finished parts;
***Most advanced equipment for EDM & WEDM, Sodick brand injection machine
Our Main Products
Customer Comments
Address:
Room 301, No. 1, Zhenglongyi Road, Chang′an Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, IATF16949
Company Introduction:
Cents is a factory with many years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13, 000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company′s core value requirements