2. Technical analise for mold design:
The size of the plastic parts is large, coupled with the inclined slider core pulling in two directions, so the mold is bulky, the mold cavity 1*1, and the mold base is a standard mold base DCH6570 A200 B130 C195 GP500 EGP ∅30( 4X).

The positions of the two oblique core-pulling sliders are staggered. In the process of mold clamping and mold opening, the two sliders need to move in sequence. Therefore, the two inclined sliders are controlled by oil cylinders. The inclined surface of the slider is locked with A plate, and a wear-resistant plate is designed on the inclined surface. The inclined guide rails at the bottom of the slider are all inlaid design. The fixing method of the oil cylinder needs to be paid attention to. The piston rod of the oil cylinder cannot be screwed directly on the slider seat. The correct way is to screw the piston on the joint, and then clamp the joint in the T-slot of the slider seat.

The gating system adopts the glue feeding method of turning from a pin gate to subgate. 

The ejection of plastic parts adopts inclined ejector and ejector pin ejection. 

The cavity and core are designed for cooling in the pool. The slider is designed with a water-carrying circuit with direct water-carrying cooling to ensure effective injection molding.

OUR ADVANTAGE: WE WILL BOTH CONSIDER TO SAVE MOLD COST AND PRODUCT COST, SO YOUR INFORMATION IS VERY IMPORTANT FOR US.

  Our factory has been certified by ISO association adn NAQ16949 for Auto parts
  

Cents is a factory with 20 years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13,000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company's core value requirements;

  ***More than 40 sets injection machines;
  ***More than 20 engineers and 200 workers;
  ***One-stop service in making mold and molding;
  ***Anti-dust workshop for IMD/IML molded parts;
  ***Assembly line available for some finished parts;
  ***Most advanced equipment for EDM & WEDM, Sodick brand injection machine